Fronius Error Codes IG 15, IG20, IG30, IG40, IG60 


Fronius is an Austrian inverter manufacturer and are renown from their excellent build quality. They started making solar inverters in the early 1990's and make models for both domestic and commercial buildings.

Steps to take if your solar pv system with Fronius inverter has stopped generating:

  • Check if any fuses have tripped in your fuse box/consumer unit
  • Also check to see if there is a mini fuse box just for the solar and check the fuse in there too
  • Make sure that nobody has accidently switched off the system by turning one of the DC /AC isolators
  • Check you inverter for error messages and use the table below for possible causes.

If you need help with your inverter, check below to see if we cover your area, and get in touch. 

Areas we cover:

  • Domestic Projects: We cover Surrey, Hampshire, Middlesex, Sussex, Kent, Berkshire & most of London.  
  • Commercial Projects: We cover the South East, Greater London, the Midlands and Bristol & Bath


Fronius IG Inverter

Contact us

Enter your details below and one of our team will be in touch

Untitled Button

Fronius Error State 101, 104, 107 & 108

Error Code

Designation

Description

Repair

Code 101

Mains  voltage  not  within admissible range

As soon as the mains voltage, after detailed check procedure has returned to admissible  range,  FRONIUS

IG resumes feeding power into the mains network

Check mains voltage -Contact Rayotec Limited

Code 104

Mains frequency not within admissible range

As soon as mains frequency after detailed check procedure has returned to admissible  range,  FRONIUS IG resumes feeding power into the mains network

Check mains frequency - Contact Rayotec Limited

Code 107

AC mains network not available

As soon as the mains network conditions after detailed  check  procedure  have returned to admissible range,  FRONIUS  IG  resumes feeding power into the mains network

Check  fuse board or sub fuse board. If all fuses are fine contact Rayotec Limited

Code 108

Islanding detected

FRONIUS IG resumes feeding  power  into  the  mains network  as  soon  as  the mains  network  conditions have  returned  to  the  permissible  range  following detailed checking procedures.

Contact Rayotec  if  the  service code fails to disappear.