Warm Water Underfloor Heating Low Profile / Retrofit systems

For people who need the lowest possible build up in an existing area. Our fantastic Low Profile systems sit at just 18mm thick and can go over an existing subfloor. If you are unsure what you need please feel free to contact us by clicking here.

Untitled Button
Low Profile Retrofit - UnderFloor Heating 18mm Overlay Kit

Wet UFH Overlay Board system without controls

  • from £793.02
18mm x 1200mm x 600mm 4 Channel Overlay

18mm x 1200mm x 600mm 4 Channel Overlay

  • £20.32
Low Profile 12mm Pert-AL-Pert pipe

Our Premium Low Profile 12mm Pert-AL-Pert pipe Available in lengths of 80m or 160m

  • from £65.33
Brass Nickel with Temp Gauge & Ball Valves

Brass Nickel Manifold with Temp Gauge & Ball Valves

  • from £84.14

Frequently Asked Questions

What our customers most commonly ask us about

  • What thickness are the low profile overlay boards and how much height will they add to my floor?
  • Our low profile overlay boards are just 18mm thick, making them perfect for retrofit projects where minimising floor height increases is essential. The boards feature pre-cut channels for the pipes and provide excellent heat distribution across your floor surface. The total height addition including pipes is typically around 18-20mm.
  • Can I install low profile underfloor heating over my existing floor?
  • Yes, you can install our low profile retrofit systems directly over most existing floors including concrete, timber, and even existing floor coverings like tiles (subject to appropriate assessment). The boards are simply laid on the existing surface, channels are filled with the included fixing compound, and your pipes are pressed into place. This makes it ideal for renovation projects where removing the existing floor isn't practical.
  • What floor coverings can I use with low profile underfloor heating?
  • Low profile underfloor heating systems work well with most floor coverings including tiles, stone, vinyl, laminate, engineered wood, and carpet (with appropriate underlay). Tile and stone offer the best thermal conductivity, but all floor types can be used effectively. For optimal performance, you may need specific controls & wiring settings to suit your chosen floor covering.
  • How does the heat output compare to standard underfloor heating systems?
  • Our low profile retrofit systems deliver excellent heat output despite their reduced thickness. The 18mm boards feature specially designed channels that maximise heat transfer to the floor surface. The system works with our premium Pert-Al-Pert pipe and can be connected to any standard heating system using appropriate manifolds and controls. In most domestic settings, the heat output is comparable to standard systems.
  • Do I need to add insulation underneath low profile overlay boards?
  • While our low profile boards provide some insulation value, adding additional insulation underneath will significantly improve efficiency and reduce heat-up times, especially over concrete floors. If floor height allows, we recommend using thin insulation boards beneath the system. For situations where height is extremely restricted, special reflective insulation membranes can be used as an alternative to standard insulation. This helps direct more heat upwards into the room rather than being lost downwards.