Get in touch.

Rayotec · Established 1987 · Solar Servicing · Hampshire

Solar Panel Servicing & Repairs in Hampshire

From Basingstoke and Winchester to the Solent coast, our MCS-accredited engineers keep Hampshire’s solar PV and solar thermal systems generating.

Call 01932 784848 Request a quote

Rayotec repairs and services solar PV and solar thermal systems across Hampshire. Our engineers travel straight down the M3 from our Sunbury-on-Thames workshop, reaching Basingstoke, Winchester and Andover quickly and covering the county through to Southampton, Portsmouth and the coast. Established in 1987 and MCS accredited, we diagnose faults, replace inverters and carry out annual servicing — with up to one hour of labour included in every call-out.

Est. 1987

Family-run for nearly four decades

MCS accredited

Government-approved renewable installer

Which? Trusted Trader

Plus NICEIC, RECC & SafeContractor

360+ verified reviews

Google, Which? and Checkatrade

A county of two solar climates

Hampshire asks more of a solar system than most counties. Along the Solent, salt-laden air works steadily on aluminium frames, roof fixings and outdoor isolators; a connector that would last twenty years in Basingstoke can corrode in half that time in Portsmouth. Inland, the challenge is different: large rural arrays on farmhouses, barns and ground mounts, with long cable runs that weather — and wildlife — like to test.

We plan Hampshire work in efficient route days along the M3 and A34 corridors, so travel never inflates the cost of a repair. Whatever we find, you get a clear diagnosis and a fixed quote for parts before any work goes ahead.

Solar services available in Hampshire

Solar PV repairs

Fault-finding and repair of panels, wiring, isolators and generation meters on domestic and commercial PV systems.

Inverter diagnosis & replacement

Error-code diagnosis, repairs and like-for-like or upgraded replacement of failed inverters — all major brands.

Solar thermal & hot water repairs

Pumps, controllers, sensors, pressure loss, airlocks and leaks on solar hot water systems, pressurised or drainback.

Annual servicing & health checks

Planned inspections that catch corrosion, loose fixings and early electrical faults before they cost you generation.

Bird & pest repair

Repair the cables and connectors under the panels, usually damaged by pests, and fit a mesh afterwards to keep your system safe.

Panel removal & refit for re-roofing

Safe disconnection, removal, protection and reinstallation of arrays around roofing works, with full recommissioning.

Servicing solar in a coastal county

In Portsmouth, Southampton, Fareham and the harbour towns we treat every visit as a marine-environment inspection: checking fixing torque, looking for white corrosion on frames and isolator enclosures, and replacing connectors before they fail rather than after. Gulls are an increasing nuisance on coastal roofs too, and we fit proofing designed for larger, more persistent birds than the city pigeon.

In the Test Valley, the Winchester downland and rural north Hampshire, arrays tend to be bigger and further from the consumer unit. Long DC runs across outbuildings are a favourite target for rodents, and we trace and repair gnawed cabling as one of our most common rural call-outs.

Hampshire also has one of the densest populations of older solar thermal systems we see — many fitted to farmhouses and village properties well before the PV boom. We service both pressurised and drainback systems, including glycol replacement, pump swaps and controller faults.

Common Hampshire call-outs

  • Salt-air corrosion of isolators, connectors and mounting hardware near the Solent
  • Gull fouling and nesting on coastal roofs from Portsmouth to Southampton
  • Rodent-damaged cabling on rural and ground-mounted arrays
  • Degraded glycol and failed pumps in ageing solar thermal systems
  • Storm-loosened fixings on exposed downland properties

How it works

1

Tell us the fault

Describe the problem — include any inverter error code and the system’s approximate age. Many faults can be part-diagnosed before we visit.

2

Book your call-out

We agree a date and any access requirements up front. Every call-out includes up to one hour of labour, and many faults are fixed within it.

3

Diagnosis & fixed quote

The engineer tests the system, identifies the fault and quotes for any parts before work goes ahead — no surprises.

4

Repair, test & report

We complete the repair, verify the system is generating properly and leave you with a clear record of what was done.

Why homeowners choose Rayotec

Nearly 40 years of specialist experience

Rayotec has designed, supplied, installed and repaired heating and solar systems since 1987. Very few problems reach us that we haven’t solved before.

Accredited and accountable

MCS accredited, NICEIC and RECC registered, SafeContractor approved and a Which? Trusted Trader — credentials you can verify, from a company that will still be here next year.

Real specialists, no call centres

Your enquiry is answered by our own technical team in Sunbury-on-Thames. We aim to respond within 24 hours and usually manage it within a couple.

Transparent pricing

Fixed call-out pricing with up to an hour’s labour included on solar work, and honest system recommendations on heating — parts and costs agreed before work begins.

Hampshire — your questions answered

Do you charge extra to travel to Hampshire?

We schedule Hampshire visits in planned route days along the M3, which keeps travel efficient and costs down. Anything relating to distance or access is agreed transparently when you book — there are no surprises on the invoice.

How often should a solar system near the coast be serviced?

We recommend an annual service for any system, but on the Solent coast it matters more: salt air attacks connectors, isolators and fixings faster than inland. An annual inspection catches corrosion while it is still a maintenance item rather than a failure.

Can you service ground-mounted solar arrays?

Yes. Ground mounts are common on Hampshire’s rural properties and we service them regularly — including the long cable runs between array and building, which are the usual failure point thanks to weathering and rodent damage.

My solar hot water system has stopped heating. What usually causes it?

The most frequent culprits are a failed circulation pump, an airlock or blockage, loss of system pressure, or a faulty controller or sensor. Our engineers carry common solar thermal parts and can resolve many of these faults on the first visit.

Which parts of Hampshire do you cover?

All of it. Basingstoke, Winchester, Andover and Fleet are the quickest for us to reach via the M3; we also work regularly in Southampton, Portsmouth, Fareham, Petersfield and the villages between, out to the edge of the New Forest.

Areas we cover in Hampshire

Winchester · Basingstoke · Andover · Southampton · Portsmouth · Fareham · Fleet · Farnborough · Aldershot · Alton · Petersfield · Romsey · Eastleigh · Havant — and everywhere in between. If you don’t see your town, call us: we almost certainly cover it.

We also provide solar panel servicing in: London · Surrey · Berkshire · Sussex.

Get your solar system back to full output

Send us the fault details — or the inverter error code — and we’ll come back to you fast, usually within a couple of hours on working days.

Call 01932 784848 Send an enquiry

Mon–Fri 9:00am–5:30pm · info@rayotec.com · Unit 5 Trade City Sunbury, Brooklands Close, Sunbury-on-Thames TW16 7FD