Our Wet UFH Overlay kits are premade so you don’t have to work out the individual components needed for your installation. Rayotec’s Overlay kit includes our overlay panels which are manufactured from high density XPS 300kPa which is thermally insulated, waterproof and covered with a reinforced cement coating and is designed to be installed onto an exisiting subfloor to make retrofitting easier, it can then covered by a flexible latex self levelling compound for a smooth finish to lay your final flooring onto. They can operate as a primary heat source depending on heat loss of the room and can work with all types of floor coverings including carpet, vinyl, laminate, engineered wood and tiles.
These kits are designed for use in single zones so if you require them to be split into multiple zones you will need to purchase an Actuator and a thermostat per zone as well as a wiring centre. If you are unsure on what would be required then please do not hesitate to contact us.
Unlike many of our competitors all of our Kits include our Premium Brass Nickel manifolds, Grundfos pumps and Pert-Al-Pert pipe to ensure you have the best materials available.
Our Standard Overlay system kits include the following items:
- Premium Brass Nickel manifold
- 22mm Overlay Boards
- Grundfos A rated pump
- 16mm Pert-Al-Pert pipe
- Ball Valves (kits of 40m2 upwards)
- Blending Valve (kits of 40m2 upwards)
- Pipe cutter
- Pipe reamer
- Eurocones
About our Overlay Boards
The panels are ideal for fitting onto solid floors i.e. concrete or screed and also suspended timber floors that have been boarded with suitable floor boarding. The panels are easy to cut and install, and should be laid with the panel joints staggered in a brick bond style. The routed channels are compatible with most flexible low-pressure underfloor heating pipes. The panels are designed for use over existing floors providing a low height build up, insulated floor.
The panels are available for use with 16mm pipes with centres at 150mm. At the end of each panel is a series of pre formed return loops and 3 x routed channels which allow flexibility and versatility for multiple heated zones to be fitted.
Board Specifications
- 1200mm x 600mm (0.72m²)
- 22mm/2.6kg
- 150mm Centres
- For 15mm & 16 mm Pipe
- 0.033W/mK
- Euroclass E
About our Pert-Al-Pert Pipe
This Premium 5 layer Pert-Al-Pert pipe is used in our warm water underfloor heating kits and offers fantastic suitability for underfloor heating by combining the best elements of a plastic and metal pipe into one product.
The aluminium core provides strength and importantly acts as a barrier to stop oxygen getting into the system which can cause premature wear to the manifold. The aluminium layer also makes the pipe form-stable, making it very easy to work with by eliminating spring back for easier installation.
The majority of customers will go for the 16 x 2mm pipe as this is suitable most installations including under screed and should also be used in our 22mm overlay boards (retrofits) and Aluminium spreader plates (suspended floors). the 12 x 1.6mm should be used when looking to achieve the lowest profile retrofits in combination with our 18mm overlay boards.
Benefits of Pert-Al-Pert pipe
- 5 layer composite pipe using PE-RT inner and outer layers with a 0.25mm thick edge-welded aluminium core
- Butted welded manufacturing method
- Can be formed by hand and maintains its shape- perfect for underfloor heating pipework
- High temperature resistance- a maximum sustained working temp up to 70°c & maximum transient temperature up to 85°c
- Manufactured to meet CE & ISO9001 European & International standards
Whats in the box
Specifications
| Kit size | 75m2 Wet Overlay Kit without Controls, 15m2 Wet Overlay Kit without Controls, 30m2 Wet Overlay Kit without Controls, 45m2 Wet Overlay Kit without Controls, 60m2 Wet Overlay Kit without Controls, 90m2 Wet Overlay Kit without Controls, 105m2 Wet Overlay Kit without Controls, 120m2 Wet Overlay Kit without Controls, 135m2 Wet Overlay Kit without Controls, 150m2 Wet Overlay Kit without Controls |
|---|
All orders received before 1pm on a weekday will be sent out on a next working day service (i.e. Mon-Fri) at no extra charge.* If it's after 1pm, and you require the goods the next day, then call us on 01932 784848 and we will
try our best to send your goods out.
If we have your mobile phone number, you will be messaged in the morning with a 2 hour delivery window. You're also able to login and track the progress of the delivery driver.
Best Practice: Even though the vast majority of goods are delivered on time, there are unfortunately occasions that couriers will get things wrong and it will take 2-3 days. It's always best to order the goods a few days in advance. Once the goods arrive, open the boxes and check that everything is as expected. If you are installing it yourself take time to read the installation guide and feel free to call us with any questions.
Splitting of deliveries: Sometimes the bulkier items (insulation) doesn't fit on the conveyor belt in local transportation depots and therefore have to be manually handled which splits the delivery . The second missing items typically turn up later on the same day or possibly the day after.
*Applies to mainland UK and orders over £100. There may be some delays and extra costs for the Scottish Highlands.
Returns: You can cancel an order up to 14 days after you have received it. You then have a further 14 days to return the goods to us at your own cost. No refunds or exchanges will be made after this date.
All products must be returned unused and in a resellable condition. Mats cannot be unrolled or cut in anyway. If we received goods that are not resellable then we will send it back and a charge for the postage will apply.
Please contact us if you wish to return any item.
