Floor Pack
The Floor Pack is a sophisticated underfloor heating system that has been designed to provide heating for single zoned screeded or suspended with thermal mass floor areas, perfect for new extensions such as conservatories, kitchens and living space.
The Floor Pack uses the Rayomax pipe which is a multi-layer composite pipe with a diameter of 16mm (18mm for 18m2 Floor Pack). It is made of cross-linked polyethylene with the aluminium longitudinally welded by ultra sonic wave in an overlapping method. The pipe is so strong and resilient that it can withstand temperatures of up to 95°C at 10 bar pressure for 50 years!
Photovoltaic solar heating panels convert light into electricity. This solar power is either used or sold to the electricity grid.
Each underfloor heating Floor Pack system involves:
- Required amount of Rayomax Pipe (18mm for 18m2 and 16mm for all larger sizes)
- 3 Port mixing valve.
- Reliance pre-plumbed compact unit incl. 3 port mixing valve & pump (18m2 pack only)
- Watts Pre-plumbed Isotherm pump unit (27m2 and larger packs)
- Programmable room thermostat with timer.
- Pipe clips (For fixing to insulation).
- Pipe cutter and reamer.
- Installation & wiring instructions.
Manifold assembly (27m, 36m, 45m, 54m, 63m or 72m kits only).
The 18m2 can be connected to most existing radiator circuits. Any other sizes should be connected straight to the boiler.
Typical Manifold assembly
Manifold for 18m2 Floor Pack system
Manifold for larger Floor Pack Systems
The manifolds are both small, neat and can be hidden away in an accessible cupboard. It is made from precision matched components with flat seal connections ensuring high quality and reliability. The manifold assembly is only required with larger kits and its size depends on the number of zones and length of Rayomax™ tubing required.
About Floor Pack
 |
A programmable room thermostat is used to turn the pump on/off according to actual heat demand to maintain programmed room temps. The thermostatic controlled mixing arrangement ensures a low flow temp of the water entering the UFH circuit. |
 |
Maintains programmed room temperatures, including night set-back. Secure low temperature water to the circuit. Ensures high flow rate in floor heating circuit. Does not rely on the pump in the existing heating system. |
 |
CADs are available if requested - at a small additional cost. CAD drawing shows the Rayomax pipe layout for a typical office with kitchen and WC. Length of pipe required is calculated from plans to give an accurate quotation and Floor Pack size needed. |
Floor Pack prices
| Quantity of piping (m) | High Heat Loss Rooms (Piping @ approx 150 centres) Suitable for areas up to: |
Standard Heat Loss Rooms (Piping @ approx 200 centres) Suitable for areas up to: |
Price (Ex VAT) |
Price (Includes VAT & Delivery to Mainland UK) |
|---|---|---|---|---|
| 100 | 18m2 * | 19m2 | £500.00 | £587.50 |
| 175 | 27m2 | 33m2 | £650.00 | £763.75 |
| 250 | 36m2 | 48m2 | £755.00 | £887.13 |
| 300 | 45m2 | 58m2 | £835.00 | £981.13 |
| 366 | 54m2 | 71m2 | £925.00 | £1086.88 |
| 425 | 63m2 | 83m2 | £1020.00 | £1198.50 |
| 475 | 72m2 | 93m2 | £1120.00 | £1316.00 |
*Please note that the diameter of the piping is 18mm for the 18m2 Floor Pack. The pack has been calculated to use approximately 180 centres.
All prices include delivery to Mainland UK.
The above prices do not include the price of a CAD drawing, however if necessary a CAD drawing can be made for an additional £80 plus VAT.